Garden tools: Stop at the mess - Marie Claire Belgium

Spare parts to repair garden tools

Problems in terms of operation or the reduction in garden tools are the main reason that pushes owners to throw them away.And as you have to continue to maintain your garden, you have to buy new tools quickly.Unfortunately, this is a beautiful mess!

Repair your garden tools to avoid mess

The mess is a valid observation for equipment such as the spades, the rakes or the planters, as the motorized tools such as the mower, the brushcutter, the hedge tail, the motoculturer or the chainsaw.

However, it is quite possible to repair your garden tools, whether motorized or not, without spending a small fortune.Thanks to the different tutorials and advice given everywhere on the web and in specialized magazines, it is even possible to carry out repairs yourself.

Where to find spare parts for your garden tools?

You can find some spare parts for your various garden tools in specialized stores, in hardware stores and in supermarkets, but you will not be able to find a very extensive range of references.Another solution, much more practical and often less expensive, exists.These are online specialized stores.By consulting them, you will have at your disposal a large catalog of spare parts for motorized garden tools, without even leaving your home.In a few clicks, you will be able to find quality spare parts, adapted to the different models and brands of garden tools.

The accessories and parts offered are intended to repair the equipment failures for the garden, such as the freestanding mower, the mower, the motoculturer, the chainsaw, the hedge tailor or the brushcutter.You will be able to replace the air filter with a brushcutter as soon as it cuts, change the battery or even the gas tap.You will also be able to buy accessories such as drain kits, protective equipment or tarpaulins.

On most of these sites for the sale of spare parts for garden tools, you will also have access to advice and tutorials to maintain, store and repair your equipment.You can also ask the team available by phone to find the accessory you need.The staff will be able to advise you on the choice of parts to benefit from the best quality/price ratio.

Maintain your motorized garden tools to extend their lifespan

Motorized garden tools are the most expensive and those that require the most attention.The fact that they do not serve every day has an impact.Often poorly stored, they can deteriorate, which will influence their effectiveness.However, if they are well maintained, they will have a large longevity.Like a car, these essential tools to perform different tasks in the garden need regular maintenance.All mechanical organs must be regularly controlled.

Check and maintain the engine

Whether equipped with a 2 -stroke petrol engine, the tool must be checked regularly.The air filter must be checked at least once every season.It must first be dismantled, wash and dry it before putting it back in place.If you decide to clean the engine, you can take advantage of it to clean its cooling fins.You must also think of checking the condition of the candle.It must be dismantled once a year.If it is already used, you must replace it.

If your tool is equipped with a 4 -stroke engine, a drain is necessary at least once a year.We advise you to drain before wintering.If you have an electric motor, note that maintenance is simpler.You should regularly clean cooling gowns.The latter are often obstructed by dirt such as grass debris and dust.

Regarding wireless motorized garden tools, remember to load the battery after each use.You will thus be able to extend the life of the battery and have a ready to work equipment the next time you garden!

@Shambles151 Funny How these people are quiet as mouse when they playing and Bowing to the Royals. The bowing/c… https://t.CO/6HMMVMJDEZ

— Shaz1440💙 Sat Jun 26 13:45:18 +0000 2021

Take care of the tools

The different motorized tools need particular care after each use.

Les parties mobiles

The lawn mower being by far the most used garden tool, it is one of the equipment most likely to be used relatively quickly.After each mowing, you must take the time to clean the mobile parts before putting the mower.To do this, eliminate the accumulated waste in the different parts, including the Carter and the Evacuation Channel.Just use a knife or a pipe to get rid of it.

La lame

You must also regularly check the state of the blade of your tools such as the lawn mower.If it needs to be sharp, you must first dismantle it.You can perform the sharpening with a file or with a wheel.You can also replace the blade with a new one if it is already too worn.You will thus find the optimal efficiency of your tool.During this process, you must control the balancing of the blade to avoid accidents.As for the brushcutter, the blade must be sharpened regularly to be effective.Thanks to this maintenance, you will benefit from all the power of the engine.

La chaîne

The chainsaw is equipment that has a chain that you need to check once a year.You must replace the chain if it is in poor condition.You can also file it manually, Gouge by Gouge.After the interview, you need to fill up with the chain oil before starting the chainsaw.Note that you can entrust the installation of the new channel to a professional.

Le broyeur à lames

The blade shredder needs cleaning after each use.Indeed, its tray must be well cleaned.Once a year, disassemble the blades to sharpen and clean them.

Clean your motorized tools

Motorized garden tools such as the motivore and the motoculturer tends to accumulate plant debris.You must eliminate them after each gardening session.Use a metal brush and fat.This process has a cleaning and protective virtue for the equipment.

But you can also use soapy water and a brush for cleaning.Always remember to dry the metal parts after cleaning, to preserve them from the rust.

Our advice for maintaining your garden tools

Like motorized garden tools, garden equipment such as rakes and spades need good maintenance.Even if they are not motorized, the garden tools cost relatively expensive, especially if they are good quality equipment.Good maintenance will therefore allow you to extend their lifespan.Maintenance of a garden tool generally consists of cleaning after each use.Here are some tips for taking care of your garden equipment.

Step 1 - Clean garden tools

Very useful, equipment such as spades, rakes, grelins and other tools that allow you to work on the floor are used throughout the year.After use, the earth and the plant debris will interfere in every corner of your tool.To eliminate earth and dirt, you need to clean the heads, sleeves and joints using a brush or glass paper.

For the metal parts which have rust points, you must scratch them with iron straw.Regarding cutting tools such as pruning shears, shears and shocking, you can clean the blades with alcohol.In addition, think about cleaning the cuts of cuts with disinfectant.You should apply a disinfectant like 90 ° alcohol or alcohol to burn on the blades.

In general, it is necessary to wash the garden tools regularly, once a week, with water and soap.Take care to dry them well to avoid rust points.

Step 2 - Repair the tools

Even if most of them are not used every day, the tools are still weakened by regular manipulation.Maintenance -free, they can generate more or less serious injury, if they break up when using.We advise you to monitor the condition of the sleeves and fixings before each gardening session.At the slightest problem noted, it is necessary to make the repair before reusing it.

For example, if the fixings relax, you must tighten the screws or strengthen them with nails.Note that the screws represent a much more solid fixation than the nails.In addition, if you notice long cracks on the handle of your tool, you will have to buy a new one and replace it.

STEP 3 - sharpen the blades and claws

The blades and claws of garden tools lose their effectiveness over time.To restore effectiveness, you need to sharpen them from time to time.First of all, they must be cleaned with water and soap.Then you will need a metal file to sharpen the sharp part.This technique works with all the sophisticated garden tools such as spades, binettes, rakes, coal and serfouettes.

For tools with blades, you can sharpen them with a wheel or a sharpening stone.You can use the sharpening stone for the cutting blade.If you have little patience, the wheel remains the ideal solution for you.

Step 4 - Preserve garden tools

To avoid the too fast wear of garden tools, you have to think about maintaining them with certain products that you probably already have at home.As soon as the tools are clean, you can apply them to extend their lifespan.

To do this, after each use coat the paraffin metal tools to preserve them from rust.For the sleeves, you must maintain them with linseed oil so that the wood is more resistant.

Step 5 - Store the equipment carefully

Finally, note that storage is also a crucial point, even if we don't always think about it.Indeed, arranging the pell-mell tools in a garden shed is not enough.To increase their lifespan, you must store your garden tools in a dry place, out of bad weather.You have to hang them on the wall, having the metal parts upwards.

What to do with irreparable garden tools or those that no longer serve you?

To adopt a more responsible behavior and avoid the waste, turn to recycling and the circular economy!But what to do with garden tools that you should separate?Anyway, don't throw them away.Note that some stores specializing in the sale of garden tools regularly offer a collection of our old equipment.The tools you are going to give will undergo repair treatments and will be redistributed to other people who need it.

Regarding motorized tools, find out with your seller in the event of a breakdown that you cannot repair.It probably offers a repair service that will allow you to benefit even longer from your equipment.